1/8th Scale Shimakaze

Hello everyone, Kahotan here! (@gsc_kahotan)

I can run about 50m in about 11 seconds! Compared to Shimakaze I really am a slowpoke!! (´;ω;`) Today I’m going to be taking a look at this lovely figure, up for order until the 26th March! The 1/8th scale figure:

Shimakaze! ♥

18th-scale-shimakaze

From the popular browser game ‘Kantai Collection -KanColle-‘ comes a 1/8th scale of the destroyer class ship, Shimakaze! The pose is based on the cover illustration of Febri Vol.19 and features Shimakaze in a rather mischievous pose! 

Shimakaze’s beautiful slender body has been sculpted down to the finest of details, and the three Rensouhou-chan artillery cannons by her side have been faithfully included, each with their very own playful expression!

Oooh!!! (*´▽`*)

The scale Zekamashi-chan is finally here!!

18th-scale-shimakaze

I just can’t get enough of her expression! It’s like a naughty little giggle inviting everyone in for a closer look!

The beautiful sculpting of the back of her knees makes me want to brush my fingers up and down it all day long! (*´Д`)

18th-scale-shimakaze

Her bottom is of course amazing… but her hips are also not to be missed out on!! The pose is based on the front cover of the magazine Febri Vol.19!

The figure itself is sculpted by Manabu Katou, while the tower of Rensouhou-chan’s are sculpted by the 3D Team’s sculptor, Shinya Iguchi! The combination of the two give a lovely volume to the figure! ♡

Let’s start off with the Rensouhou-chans! (ノ`・∀・)ノ

18th-scale-shimakaze

Just the Rensouhou-chans take up a fiar amount of space… they’re piled up quite high!

There’s a big one…

18th-scale-shimakaze

A medium sized one…

18th-scale-shimakaze

And a little one…! ♡

18th-scale-shimakaze

The little one is a little special with a cute sailot’s outfit! ヽ(o´∀`o)ノ

It’s so adorable!!

As I already mentioned, the Rensouhou-chans were sculpted by the 3D team… so I thought I’d have a word with their sculptor… Shinya Iguchi!

(・∀・) “I really wanted to capture both the mecha-artillery feel as well as the cute appereance of the Rensouhou-chans while I was sculpting them!

On first look they just look like cute mascot characters… but on closer inspection you can see the details that have gone into the turrents and torpedo launchers!

18th-scale-shimakaze

(・∀・) “Yep! The expressions capture their cuter side, while on the other hand their power as weapons are preserved on the design!”

The contrast is rather interesting – you get the best of both worlds! Σ(・Д・」)

18th-scale-shimakaze

(・∀・) “It honestly wasn’t an easy task, but I did my best to impress the fans! Obviously Shimakaze is the main attraction, but the Rensouhou-chans are definitely a lot of fun to display too!”

After all, it wouldn’t be Zekamashi-chan iithout Rensouhou-chan!(`・ω・´)

But anyway, let’s get back to Shimakaze!

18th-scale-shimakaze

This time around we’ll chat with Shimakaze’s sculptor, Manabu Katou!

(・∀・) “I’m sure you already guessed this… but my highlight is without a doubt her bottom!

18th-scale-shimakaze

It’s certainly not something anyone would overlook!
Nomnomnom! ♡ ゚。*(*´∀`*)*。゚+

18th-scale-shimakaze

(・∀・) “Also note how the g-string is being pulled into her skin, making it sink in a little!

18th-scale-shimakaze

The original illustration on the Febri cover only featured her down to her knees… how did you do the rest of the sculpt?

(・∀・) “Based on other images, I simply thought up how it would have looked if the illustration has gone all the way down to her feet!”

I see! So that’s why she has crossed legs! Her stomach area was also never shown in the illustration but the figure makes it look lovely… that ever so slight bump when looking from this angle is amazing! (ノ)´∀`(ヾ)

18th-scale-shimakaze

(・∀・) “Yep! Seen she was leaning over I wanted to add a bit of gravity to the sculpt… I really ended up spending a really lon time on getting that stomach right!”

The squishy feeling it gives makes me want to touch it so badly! How could anyone resist?! (*´▽`*)

(・∀・) “Of course fans of the original illustration are sure to love posing her at the same angle… but the thing with this figure is that there are so many great angles to display her from, you might have some trouble choosing which is best! Low and high angles also both suit her so well!”

18th-scale-shimakaze

Filled with details and highlights! ♡

The 1/8th Scale…

Shimakaze!!

18th-scale-shimakaze

She is up for preorder over at the GOOD SMILE ONLINE SHOP until the 26th March at 21:00JST! Orders from the online shop will also include a special ‘Nendoroid Plus Rubber Strap: Rensouhou-chan Sailor Ver.’! ☆

GOOD SMILE ONLINE SHOP: 1/8th Scale Shimakaze

The exact design of the strap is still being confirmed, but will be ready to show everyone shortly!(`・ω・´)

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

As of today, the GOOD SMILE WORKS website has been released!
ヽ(*・ω・)人(・ω・*)ノ

18th-scale-shimakaze

GOOD SMILE WORKS:
⇒ http://special.goodsmile.info/goodsmileworks/

This site shows the entire process of a figure’s production cycle, from planning to shipping. At the moment it is only available in Japanese, but an English version is planned for the future! The horizontal scroll of the website really makes it fun to go through the process! ♪

Each picture can also be clicked to read the smaller print, so be sure to take the time and enjoy it if you’re interested in the figure industry – particularly if you missed the booth at WonFes!! (σ・∀・)σ

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

Finally a quick notice! From the 3rd March to the 5th March, Kahotan Blog will be taking a little break due to a company training holiday!

Also note that GSC support will be closed during this time, but we will get back to any queries shortly after the break! Thanks for your understanding!

More Details: http://www.goodsmile.info/en/post/3849/

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚
/Kahotan’s Inner Voice\


∧_∧
(`・ω・).。0   (Tomorrow is already March! Anime Japan is coming up soon!)
( つ つ
と_)_)

Anyway, I hope to see you all again next week!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

© 2014 DMM.com/KADOKAWA GAMES All Rights Reserved.

Nendoroid May’n

Hello everyone, Kahotan here! (@gsc_kahotan)

I recently discovered that my birth date is just one day apart from the real person behind today’s Nendoroid! Today I’m going to be taking a look at…

Nendoroid May’n! ♡

In commemoration of the upcoming ‘May’n Road to 10th Anniversary Japan & World Tour 2014-2015 “dots and lines”‘ comes a Nendoroid of May’n herself! Her well-known hairstyle and trademark short pants have all been converted into Nendoroid size as accurately as possible for fans to enjoy!

Her microphone is included together with special hand parts based off actual poses from her live performances, allowing you to pose her ready to perform on stage! A hand towel from her live performances is also included for her to hold! On the other hand, she also comes with a delicious taiyaki allowing you to pose her as the (self-proclaimed) Goodwill Ambassador for Taiyaki! Simply choose between the serious or the more playful May’n whenever you like!

The 4th Nendoroid based on a popular music artist! I can’t wait to see the real May’n on stage again! Before we take a look at the Nendoroid itself… I first want to take a look at the packaging!

The overall design is much more stylish compared to most Nendoroids… definitely nicely suited to May’n! ☆

The different pattern on the sides makes it rather cute! ♥
Plus the inner cardboard is a photo mosaic from May’n’s past live concerts!

The brighter photos even spell out ‘May’n’! Seeing these kind of mosaics always makes me want to take a nice close look at each of the photos! ヘ(゚∀゚*)ノ

But for now, let me focus on the Nendoroid itself! Her microphone is included to pose her singing! ♫

The microphone is a ‘Skull Mike’ which May’n is well known for using! (ノ`・∀・)ノ

You can obviously attach and remove the mike whenever you like, or even make her hold it upside down like so!

Easily pose May’n performing live for her audience… or just for you! ♡ A small towel is also included, allowing you to display her whirling it through the air!

Usually at concerts it’s the fans that wave the towel around, but May’n enjoys taking part in the fun too! Just look at that smile! ヽ(o´∀`o)ノ

Even the logo on the towel has been faithfully recreated!

Speaking of faithful… the Nendoroid’s hairstyle looks lovely!
It captures May’n’s characteristic hair beautifully!

Even the lighter streaks of hair have been included! (`・ω・´)

Oh yes! Her hat is also completely removable, and can even be angled in different ways for interesting poses! ♫

Here I’ve posed it at a downward angle covering up her eyes… it adds an extra touch of cool to her appearance! It’s amazing how much the feeling of a figure can change with just a slight switch of parts, or simply moving a hat like this!

As some of you may have already noticed, she also comes with two different expressions to enjoy! ♡

(・∀・) “May’n certainly is amazing during her concerts, but the figure allows for a different side of May’n too!”

We’re joined by Nendoroid May’n’s planner, Kyojin!

(・∀・) “May’n loves taiyaki so much that she named herself the ‘Goodwill Ambassador for Taiyaki’… so we just had to include some taiyaki parts!”

Ooh! (*´▽`*) I love little parts like this! ♡

Somehow she seems to have a much cuter personality while holding onto the taiyaki…! (*´Д`)♥

< Nendoroid May’n offering me a taiyaki >

< …I would never say no! Nomnom!! >

(・∀・) “Her outfit is carefully detailed, with close attention given to the short pants and accessories. Take a nice close look!”

May’n’s unique style and personality are packed into cute Nendoroid size!

(・∀・) “Not only did we have the honor of making her Nendoroid, she also performed live for us at WonFes!”

Even with the terrible weather, she warmed everything up with an amazing performance for everyone! (*´∀`*)
I kind of forgot I was supposed to be working and danced around with everyone else…

(・∀・) “I know how you feel! I was holding back the urge to run out and join all the fans… But anyway, back to the Nendoroid! Nendoroid May’n is currently on sale at all the official locations of the current ‘dots and lines’ tour!

More details: May’n Official Site

Once you’ve enjoyed yourself at the concert, grab a May’n to take home too!

Nendoroid May’n!

She is on sale at all concert locations for the May’n Road to 10th Anniversary Japan & World Tour 2014-2015: ‘dots and lines’. (`・ω・´)

You can find the concert locations here: http://mayn.jp/dotsandlines/

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚
/Kahotan’s Inner Voice\


  ∧_∧
 (*´▽`).。0   (Tomorrow I’ll be taking a closer look at ‘Zegamashi-chan’!)
 ( つ ⊂
 と_)_)

Anyway, I hope to see you all again next week!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

 

©HORIPRO

Nendoroid Black Gold Saw: TV ANIMATION Ver.

Hello everyone, Kahotan here! (@gsc_kahotan)

I was always bad with the electric saw in arts and craft classes making each and everyone of them a huge struggle for no real reason… the way something so thin could cut through wood so easily was always kind of scary! (´=ω=`)

But anyway, today I’m going to be taking a look at…

Nendoroid Black Gold Saw: TV ANIMATION Ver.

From the anime that aired during Fuji TV’s noitaminA block, ‘Black Rock Shooter’ comes a Nendoroid of Black Gold Saw in her updated design from the TV anime series! Her trademark weapon, the giant ‘King Saw’ as well as the watering can she used in the series are both included. Additionally, the ‘incomplete girls’ from the series are also included in miniature size.

She comes with two expressions including her standard expression as well as a combat expression for fighting scenes. Her knees are also specially articulated, allowing you to recreate even more of your favorite scenes from the series!

It’s been about two years since the series aired on noitaminA, but finally we have the fifth character join the Nendoroid series!

Black Gold Saw has always been the more relaxed of the characters, and that composed look transfers into Nendoroid form beautifully! ♡

Of course her giant weapon ‘King Saw’ is included too, and it looks rather frightening, even in Nendoroid size! (`・ω・´)

The little ornaments all over her outfit have been painted and sculpted with such intricacy! She also comes with a combat expression, perfect for displaying together with the King Saw! ♡

The teeth sticking out the side of her mouth add both a cute aspect and gives her a look that is ready for combat!

Just like the OVA version of Gold Saw, she also features joints in her knees for extra little changes when striking a pose! Those smaller changes are really what make for the most personalized displays! ε=(。・д・。)

I absolutely love this silent, menacing look she has while holding the King Saw… as if ready to strike at any point! (/ω\)

(・∀・) “There is still a lot more to her though!”

Today we’re joined by the head planner of this Nendoroid, Otanaka!

(・∀・) “This time she even comes with her watering can!

Oooh! I remember this!! ( ゚д゚)!

(・∀・) “I’m sure you do! It was used in the series to increase the number of incomplete girls in the Hollow World!”

It also has a similar appearance to the King Saw, which helps bring the whole figure together nicely! ヽ(*・ω・)人(・ω・*)ノ

(・∀・) “But that’s not all… if the watering can is included, then these also just had to be included!”

Ooh! The Incomplete Girls are also included?!

(・∀・) “Yep! we decided to include two of them too! The expressions are even slightly different!”

I-It’s true!! (゚A゚;)

** Size comparison with wooser **

(・∀・) “The heads are even turnable, allowing for slightly different renditions!”

By the way… a strange pedestal has been featuring in the last few photos…? Could it be what I think it is?

(・∀・) “That’s a special stand included with her! It’s based on the elevated areas in the series!”

So that means an extra stand is included too! (ノ`・∀・)ノ
Definitely a suitable stand for the BRS universe too!♡

(・∀・) “I recommend displaying her with the other characters from the series to bring out the universe even more!”

Add her to your collection and sink into the BRS world!

Nendoroid Black Gold Saw: TV ANIMATION Ver.

She’ll be up for preorder from tomorrow, the 27th February! (`・ω・´)

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

Finally a quick reminder!
Tomorrow the 26th February is time for another Kahotan Broadcast! (`・ω・´)

================================
Kahotan Broadcast: February Edition

Date: 26th February from 20:00 – 21:30JST
URL: Kahotan Broadcast: February Edition

Contents:
◇ Upcoming KanColle Items!
The latest figmas, scale figures and Nendoroids including the 1/8th scale and figma Kongou!

◆ This Months Pick-Up Products!
The long awaited Nendoroid of the popular game/movie!

◇ Sneak Peek at Next Month’s Items!
Glasses-girl heroines, girls from the Ankou team and more!
===============================

I hope you’ll join us for some fun!

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚
/Kahotan’s Inner Voice\


  ∧_∧
 (;´∀`).。0   (There have been so many live broadcasts this month!)
 ( つ つ
 と_)_)

Anyway, I hope to see you all again next week!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

Nendoroid Sasara

Hello everyone, Kahotan here! (@gsc_kahotan)

Not only am I completely unable to swim… I also am terrible at fishing! I once went fishing for rainbow trout and ended up going home without even a nibble… even though I was fishing in a fish tank!! Water-related sports are definitely not for me…

But anyway, today I’m going to be taking a look at a figure that went up for preorder a little while back…

Nendoroid Sasara! ♡

From the original anime series ‘Fantasista Doll’ comes a Nendoroid of one of the five girls that appeared before Uzume – the leader type doll, Sasara! She comes with three different expression parts including her standard smiling face, a combat face and a winking face.

Optional parts include her fencing sword as well as kneeling parts to recreate the popular scene from the series. Be sure to display her with the previously announced Nendoroid Uzume Uno to recreate even more scenes from the series!

\ Fantasista Doll / \ Hey! / \ Hey! /

The second Nendoroid from Fantasista Doll following on from the previously announced Nendoroid Uzume Uno! Her pony-tail also articulated at a very high point allowing for all sorts of poses!

Her adorable outfit is sculpted in amazing detail! It has a bit of a regal look to it, and the ribbon and stars all over the design make for a lovely and original design! (*´▽`*)

Her fencing sword is also included to pose her ready for combat! The little peek of skin between her skirt and shorts is also lovely! ( -ノェ-)

Her expressions include the smiling face above… as well as this cute frowning expression!

She looks so sincere! The upturned eyebrows make it perfect! (`・ω・´)

(・∀・) “This expression is perfect for a very special pose!”

We’re joined by Sasara’s planner, Otanaka-shi!

(・∀・) “This pose!”

Ooh! I recognise this! ( ゚д゚)

(・∀・) “Yep! Special sitting parts are included to recreates the scene where Uzume scolds her and the others! You could also see it as a sulking pose!”

She’s even barefoot! ♪ A perfect rendition! ♡

She also looks great displayed with Uzume!

(・∀・) “If you’re going to pose them together, I recommend the winking expression!”

Oooh!!! (*´▽`*)! She’s adorable!!

(・∀・) “She’s adorable alone… but even more adorbale with Uzume by her side, which allows you to recreate the ending theme pose! I wanted to show everyone, but Uzume’s expression parts are currently off in China!!”

Ah! You just gave away why I displayed her with only her back showing in the last photo! ^^;

Anyway – at least there is a release photo featuring the pose, which should still give everyone a good idea!

The ending theme in Nendoroid size!! っ( ;∀;)

(・∀・) “Posing her together with Uzume definitely allows for a lot more scenes from the show! It really brings out the Fantasista Doll atmosphere!”

Become a master yourself with Sasara by your side!
Or alternatively display her with her real master, Uzume!

Nendoroid Sasara!

She’s available for preorder now! ♡

Orders from the Good Smile Online Shop will continue until the 19th March at 12:00JST : http://goodsmile-global.ecq.sc/gscnenwd00397.html

Be careful not to miss out! (`・ω・´)

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

Finally a quick reminder!
Tomorrow the 26th February is time for another Kahotan Broadcast! (`・ω・´)

================================
Kahotan Broadcast: February Edition

Date: 26th February from 20:00 – 21:30JST
URL: Kahotan Broadcast: February Edition

Contents:
◇ Upcoming KanColle Items!
The latest figmas, scale figures and Nendoroids including the 1/8th scale and figma Kongou!

◆ This Months Pick-Up Products!
The long awaited Nendoroid of the popular game/movie!

◇ Sneak Peek at Next Month’s Items!
Glasses-girl heroines, girls from the Ankou team and more!
===============================

I hope you’ll join us for some fun!

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


  ∧_∧
 (  *゚ー゚*).。0   (Tomorrow is someone with a giant saw!)
 ( つ つ
 と_)_)

Anyway, I hope to see you all again next week!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

Nendoroid Nagisa Momoe

Hello everyone, Kahotan here! (@gsc_kahotan)

My favorite kind of cheese is Parmigiano-Reggiano, and on that note today I’m going to be taking a look at a cheese-loving Puella Magi…

Nendoroid Nagisa Momoe! ♥

From the popular anime movie ‘Puella Magi Madoka Magica: The Rebellion Story’ comes a Nendoroid of the newest character in the series, Nagisa Momoe, wearing her Puella Magi outfit! Optional parts include her trumpet weapon with effect parts, as well as her beloved cheese! The Dessert Familiar is also included!

She also comes with three expressions including her standard smiling face, an expression with an open mouth and a Bebe expression. You can easily create cute battle scenes from the series! ♪

Nagisa-chan!! (*´▽`*)

The long-awaited released of the character who debuted in the third Puella Magi Madoka Magica movie, Nagisa Momoe!! She comes with some amazing optional parts… which I’ll be revealing for everyone today!!

But let’s start off with how she looks from the back! ☆

Look at her long, fluffy looking hair! Don’t you just wish you could comb your fingers through it?! Anyway, let’s move onto the optional parts! ♪

First up we have the ‘Dessert Familiars’ standing beside her! ★

They’re so cute!! Two are included for double the fun!
The cute circular form and polka-dotted bodies look lovely! ♡

Their thin arms, leg and tail are also adorable! I really love these two!! (/ω\)
Nagisa’s tights also faithfully keep their polka-dotted pattern!

Ah… I’m starting to want to rewatch the movie more and more!

The smaller details on her outfit also stand out beautifully – such as the candy-shaped soul gem holder on her belt, as well as the ribbons at the end of her suspenders! They are painted so intricately! ♥

Nagisa’s Puella Magi outfit is actually a poncho by design, but on the Nendoroid we made it into a sleeve in order for her to hold her weapon – the trumpet!

The trumpet also comes with attachable effect parts to display it in use just like in the series! ヽ(*・ω・)人(・ω・*)ノ

Her trumpet has a lovely upbeat feeling to it… but personally her adorable expression is what gets me every time!! (゚A゚;) She’s such an adorable small little character, but at the same time she is also so strong!

(・∀・) “Nagisa-chan comes with other adorable expressions too!”

We’re joined by her head planner, Yassan!

(・∀・) “I took over this project from Oda-P when he left. The actual ideas were all his, I was more involved with getting everything approved!”

Even so, you must know her better than most! What makes Nagisa’s other expressions so good? (`・ω・´)

(・∀・) “Hmm… let’s start off with this!”

Ooh!! Cheese!! Cheese and sitting parts!

(・∀・) “Yep! We had to include her favorite food – her cheese! You can even pose her sitting down and munching on it!”

Sitting with her legs out in front her of her like this really seems to suit her personality perfectly. (*´▽`*)

(・∀・) “But there are more cute poses to come!”

Ta-da!!

Ooooh!!! (*´Д`)

(・∀・) “This expression works perfectly with the cheese eating pose!”

Her floppy sleeves make the pose even cuter to me…!

(・∀・) “There is still another very special expression though!”

…( ゚ロ゚)

(( ロ゚)゚

((( ロ)~゚ ゚

(・∀・) “Yep! She comes with a Bebe expression!”

We’re managed to keep this expression a little secret for quite some time!

(・∀・) “I wanted to show everyone as soon as possible… but I was told it would have more impact if we held it back till the very end!”

The familiars on the tray are also included to display along with it!
(°Д°;≡°Д°;)

(・∀・) “It’s cute in a weird kind of way… something I’m sure many fans will enjoy!”

Super cute and even comes with a Bebe expression!

Nendoroid Nagisa Momoe! ♥

She’ll be up for preorder from tomorrow!! ♥

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


  ∧_∧
 (*゚ー゚*).。0   (I’m gonna go buy some cheese for Nagisa-chan!)
 ( つ つ
 と_)_)

Anyway, I hope to see you all again tomorrow!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

©Magica Quartet/Aniplex・Madoka Movie Project Rebellion

Nendoroid Asuna: Titania Ver.

Hello everyone, Kahotan here! (@gsc_kahotan)

I’ve recently been looking at cute parrots on Twitter to calm my nerves… they’re strangely relaxing to look at! I’ve also recently become rather interested in inko ice cream…!

But anyway, today I’m going to be taking a look at…

Nendoroid Asuna: Titania Ver.!


 

From the anime series ‘Sword Art Online’ comes a Nendoroid of Asuna in her fairy form that was trapped up in the World Tree. She comes with three different expressions including her standard expression, as well as a joyful expression with tears in her eyes to recreate the scene she reunited with Kirito and Yui.

Her third expression is a pained expression, which also comes with creeper plants to display her tied up in the cage. Kneeling parts are also included to complete the scene in its entirety! Her expressions can also be switched with the original Nendoroid Asuna, allowing for even more possibilities!

Oooh!! (*´▽`*) Welcome my desk!!

A cute Nendoroid of Asuna from the Fairy Dance arc! Together with parts to display her as the Fairy King’s captive! ♡

One of my favorite things about this Nendoroid is of course the included cage!

The bottom of the cage has multiple holes to connect a standard Nendoroid stand, so you can stably pose any Nendoroid inside with ease! (`・ω・´)

The door of course opens and closes making it really seem the Nendoroid really is completely trapped inside!

(・∀・) “There is also a hole on the top of the birdcage… can you guess why?”

We’re joined by the planner for the figure… Yuri-chan Honpo!

Hmm, I see there is a hole in the triangular point at the top… is this what I think it is? (; ・`ω・´)

(・∀・) “The hole is there for you to slide your own rope through, allowing you to do this…!!”

(・∀・) “Trapped up in the World Tree!! ♪”

Ooh, I see!! A hole to thread a rope through, and hang the cage up high!

(・∀・) “Ah, but note that there is no rope included with the product itself! You’ll need to provide your own – it’s definitely a fun way to display her though! Make sure the rope is strong enough to support her!”

The atmosphere of the SAO world definitely seemed to jump out a lot more as soon as she was hanging from the tree! ε=(。・д・。)

I also look forward to displaying other Nendoroids in the cage! I think this picture captures her desire to be free really nicely!

(・∀・) “We focused on more than just the bird cage though! You can even use expressions from the standard Nendoroid Asuna for even more options!”

Hmm? Most Nendoroid expressions are exchangeable, that’s not very special!

(・∀・) “Think again! Titania’s ears are not exactly standard ears, so the expressions wouldn’t swap without a few special changes!”

Ah! I see!! Her ears are really the main change to her appearance in the Fairy Dance arc after all! But… does that mean that this Asuna’s expressions can’t be used on the normal Asuna? (´;ω;`)

(・∀・) “We’ve made the ears a part of the hair parts, meaning you can easily swap them either way! The standard ears will be covered up by the Fairy Dance ears!”

Yay! Definitely a very thoughtful change! Here is an example of the standard Nendoroid’s expression on Titania’s body!

(・∀・) “Yay! Isn’t she cute?! She’s so cute!! ♡”

I can see just how much you love Asuna by the work you put into this option! Let’s take a look at the expressions included with Nendoroid Asuna: Titania Ver.! ♪

First up we have her longing expression!

How could anyone look into those uneasy eyes and not want to rescue her?! I’ll save you Asuna, just you wait!!

Next up we have her joyful expression!

This expression was made in the image of the scene where she reunites with Kirito and Yui! ♡ I’m sure the expression could be used for various other scenes too! (`・ω・´)

By the way, the photo above pictures Asuna thanking me, her hero, for rescuing her from the cage!! However we cannot stay together, so we part with tears in our eyes, but joy in our hearts!
*My imagination is hard to put into words sometimes…

Finally we have her ”captured” expression!! (゚A゚;)ゴクリ

A pained expression!!

Special parts are included to recreate the vines that tie her to the cage!


(・∀・) “Although it’s not an exact replica, we wanted to recreate the scene where she was tied up by the Fairy King Oberon! After trying a few different options, this is what we settled on! Perfect for recreating her desire to be rescued by Kirito-kun”

Not to mention that it can be used in various other angles for a different feel!

With a quick switch of pose, it can be made to look like she is praying with all her might! I think it would also work quite nicely as an embarrassed tsundere face! ((o(´∀`)o))

(・∀・) “Another important notice from me! This item will not be available in standard stores!”

This item is an event item for the upcoming Anime Japan 2014 Event!

===============================
Anime Japan 2014

Dates: 22nd/23rd March from 9:00 – 17:00
Place: Tokyo Big Sight East Halls 1 – 6
Booth: Good Smile Company Booth (J35)
Tickets: ¥1,500 (Stage Access) / ¥800 (No Stage Access)
Children Under 3 Free.

Anime Japan 2014 Event Information: http://event.goodsmile.info/event/event-1242/
Anime Japan 2014 Official Site: http://www.anime-japan.jp/

*Nendoroid Asuna: Titania Ver.’s Event Price is ¥4,500.
===============================

Stock is limited at the event, arrive early to avoid disappointment.
Online sales are planned at a later date after the event.

Titania, trapped up in a bird cage… be sure to rescue her from her prison!

Nendoroid Asuna: Titania Ver.!

She’ll be on sale on the 22nd and 23rd March at Anime Japan 2014!

Plus, the scale figure of the same character by Max Factory was also announced today! ♡

The 1/7th Scale:
Asuna ~Captured Titania~!

From the popular anime Sword Art Online comes a 1/7th scale figure of the heroine ‘Asuna’! The figure features Asuna in her Titania avatar from the Fairy Dance Arc, posed as a captive of the Fairy King Oberon.

Metal chains are included with the figure allowing you to complete her captured appearance in its entirety. The sorrowful look on her face, her long flowing hair and the plants growing around her arms are all sculpted to the finest of details for fans to enjoy!

The overall feeling between the Nendoroid and scale figure is rather different… the sexy side definitely comes out more! (●´ω`●)

The combination of the pose, outfit and amazing sculpting of the stomach… delicious!! (*´▽`*)♡

She was introduced in detail on the figma blog yesterday, so be sure to take a look! ♪ http://ameblo.jp/figma/entry-11776205816.html

Asuna ~Captured Titania~ is available at the GOOD SMILE ONLINE SHOP! Orders are open until the 19th March at 21:00JST! Don’t miss out! (`・ω・´)ノ

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

This month we will also be running the Kahotan Broadcast next week!!

===============================
Kahotan Broadcast: February Edition

Date: 26th February from 20:00 – 21:30
URL: Kahotan Broadcast: February Edition

Contents:
◇ Upcoming KanColle Items!
The latest figmas, scale figures and Nendoroids including the 1/8th scale and figma Kongou!

◆ This Months Pick-Up Products!
The long awaited Nendoroid of the popular game/movie!

◇ Sneak Peek at Next Month’s Items!
Glasses-girl heroines, more girls from the Ankou team and more!
===============================

I hope you’ll tune-in and join in on the fun!

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

Plus don’t forget about today’s broadcast! Starting VERY shortly!


===============================
Hatsune Miku no Jikan – 5th Period –

■ Date/Time
21st February 2014. Entrance from 18:30 / Broadcast from 19:00
NicoNico Broadcast : http://live.nicovideo.jp/watch/lv169184626

■ Contents
– Project DIVA F 2nd Time –
・Latest information from the Hatsune Miku -Project DIVA F- game releasing on the 27th March 2014!
– Famima x Miku Time –
・A first look at the upcoming FamilyMart x Hatsune Miku collaboration products!
– GSC Time –
・A look at the GSC Kuji Lottery items this year!
– New Product Time –
・A look at various other upcoming Miku products!

◆ Hatsune Miku -Project DIVA F- Official Site
http://miku.sega.jp/f2/

◆ Famima x Hatsune Miku Official Site
http://famima-miku.jp/

◆ Good Smile Company Official Site
http://goodsmile.jp/

We hope to see you there!

===============================

We’ll be taking a look at all of the Kuji items later, but for now I’ll give everyone a peek at the Good Smile Kuji: Hatsune Miku 2014 Spring Ver. A, B, C and last prizes!

C Prize: Tulip Coin Jars (Rin-chan Ver. / Len-kun Ver.)

B Prize: figma Hatsune Miku: Sailor Uniform ver.

A Prize: Nendoroid Hatsune Miku: Sailor Uniform ver.

‘LAST’ Prize: Nendoroid Hatsune Miku: Sailor Uniform ver. Special Color

Miku’s uniform is so adorable!! _:(´ཀ`」 ∠):_
Rin and Len sticking their heads out of Tulips too!!

More details will be available on the broadcast! Don’t miss out!

Watch here: http://live.nicovideo.jp/watch/lv169184626

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


  ∧_∧
 (;・∀・).。0   (Just a few minutes before we start!)
 (  ∪∪
 と_)_)

Anyway, I hope to see you all again next week!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

FREEing’s Kaworu Nagisa!

Hello everyone, Kahotan here! (@gsc_kahotan)

I have a rather shy personality, so I often tend to put up my personal AT Field to prevent others getting too close! Particularly when I’m at the hairdresser… I never know what to say when they try and start a conversation! I also can never explain how I want my hair done…! ><

Anyway, today I’m going to be taking a look at FREEing’s 1/8th scale…

Kaworu Nagisa! ♪

From the third movie in the Rebuild of Evangelion series, “Evangelion: 3.0 You Can (Not) Redo” comes a figure of EVA Unit-13’s pilot, Kaworu Nagisa.

The mysterious charm of the beautiful Kaworu has been captured by sculptor ‘Hiroshi’ – even preserving the delicate atmosphere that accompanies Kaworu’s character. Everything from his stunning body-line to his gentle eyes have been carefully sculpted for Evangelion and Kaworu fans to enjoy for years to come!

Ooooohh!! (*´▽`*)

His deep gaze is looking me straight in the eyes, and his lovely body’s curves are brought out perfectly by the tight plugsuit!

Plus just as the product description states, the figure even preserves the delicate atmosphere of Kaworu’s character! Even just having him on my desk seems to make my day a little less stressful!

He has a slightly downward gaze, so looking from a slightly lower angle allows you to stare into his eyes… it also brings out his mysterious character really well! Personally however, I want to draw everyone’s attention to his amazing hipbone!

Just look at the way the bump of the bone can be seen right through his plugsuit! I can touch Kaworu’s hipbone!! ( ,,´・ω・)ノ” サワサワ

Talking about his hips, I also have to point out the reverse side!

Just look at how the tight suit brings out the shape perfectly!! He definitely does have a more manly bottom compared to most female figures! (ΦωΦ)

Looking at him from an overall perspective gives me the idea that it can’t be easy to sculpt thin, male characters like this! (゜д゜;)

He is sculpted by Hiroshi (Sakurazensen), the same sculptor who made the amazing Kaname Madoka ~The Beginning Story / The Everlasting~ and many other lovely figures. He really has captured the mystique and unique aesthetics of Kaoru’s body perfectly! ヽ(*・ω・)人(・ω・*)ノ

The 1/8th scale…
Kaworu Nagisa!


He is currently up for preorder!! You can order him from the GOOD SMILE ONLINE SHOP until the 12th March at 21:00JST! Don’t miss out! (`・ω・´)

GSC Online Shop Page:
http://goodsmile-global.ecq.sc/frescawd00036.html

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

The Miku no Jikan Live Broadcast is tomorrow, so here is a quick recap of what you can expect if you tune-in or come and watch! ♪

At the GSC-Tetsujin Cafe on the 21st February we will be running the Hatsune Miku no Jikan – 5th Period – live broadcast!!

===============================
Hatsune Miku no Jikan – 5th Period –

■ Date/Time
21st February 2014. Entrance from 18:30 / Broadcast from 19:00
NicoNico Broadcast : http://live.nicovideo.jp/watch/lv169184626

■ Contents
– Project DIVA F 2nd Time –
・Latest information from the Hatsune Miku -Project DIVA F- game releasing on the 27th March 2014!
– Famima x Miku Time –
・A first look at the upcoming FamilyMart x Hatsune Miku collaboration products!
– GSC Time –
・A look at the GSC Kuji Lottery items this year!
– New Product Time –
・A look at various other upcoming Miku products!

◆ Hatsune Miku -Project DIVA F- Official Site
http://miku.sega.jp/f2/

◆ Famima x Hatsune Miku Official Site
http://famima-miku.jp/

◆ Good Smile Company Official Site
http://goodsmile.jp/

■ Live Viewers
Those who wish to watch at the cafe at 18:30 on the day of the broadcast will need a viewer’s ticket. These tickets will be handed out from 18:00 at the register. Only one ticket per person will be provided, and they are limited so don’t arrive too late!

Also note that in order to prepare for the broadcast, we will be closing down the Kancolle Cafe on the day of the event. Those watching the event live will also be unable to order items from the KanColle collaboration menu. The grand menu will be available.

■Please Note
The cafe is likely to be very busy, and we will not be able to allow everyone inside. We will inform you when it is fill on the official Twitter Account (@Gsma_karatetsu).

One order per person is required.

We hope to see you there!

===============================

SEGA x GSC x Crypton’s Official Broadcast! So much juicy Miku information to see! Don’t miss out if you’re a fan! There are even some rumors that Mikudayo might also be making an appearance! (`・ω・´)

Plus, there will also be a limited edition drink at the cafe only available for the duration of the broadcast! A drink to match the ‘Good Smile Kuji: Hatsune Miku 2014 Spring Ver.’!

To be more specific, the drink is made to be the same color as the A-Prize for this year’s lottery, Nendoroid Hatsune Miku: Sailor Uniform Ver.!! It’s made up of Sakura syrup, white water and blue Hawaii! A taste that fans will be sure to remember… not to mention how lovely the colors alone look! ♡

I want one for myself… ( -ノェ-)

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


  ∧_∧
 (;・`ω・).。0   (I’m also going to be in the broadcast!)
 (  ∪∪
 と_)_)

Anyway, I hope to see you all again next week!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

© カラー

Nendoroid Alisa Illinichina Amiella

Hello everyone, Kahotan here! (@gsc_kahotan)

Ever since the Olympics started it’s become a daily routine for me to watch the relays when I get home… Japan may be cold and snowy at the moment, but the Winter Olympics sure to look chilly too! (=◇=;)

Anyway, today I’m going to be taking a look at…

Nendoroid Alisa Illinichina Amiella!


From the popular action game ‘GOD EATER 2’ comes a Nendoroid of the popular heroine who debuted in the original game, Alisa! She is of course equipped with her ‘God Arc’ weapon, which comes in both its standard ‘Blade Form’, as well as its ‘Gun Form’ and ‘Predator Form’! All the forms keep their imposing appearances even in the cute Nendoroid size!

But that’s not all – she also comes with various other parts including the Aragami ‘Ogretail’, as well as three different expressions – her standard face, a shouting face for combat scenes and an embarrassed face! A huge collection of parts to help fans recreate their favorite scenes from the game, and experience the unique GOD EATER atmosphere in the cutest form ever!

She’s finally ready to go up for order! (*´▽`*)

The most central member of the ‘Cradle’ branch, the beautiful Alisa! Her characteristic red hat, chequered mini-skirt and all the smaller details of her outfit all look great!

The Fenrir emblem on her back is also faithfully shrunk down to Nendoroid size!

Her hair is sculpted with a slight curl to the left giving it a slightly dynamic feeling based on the official character art! (σ・∀・)σ

But the most important thing I want to push about this figure is her amazing ‘God Arc’ weapon… which comes in three different forms!

Let’s take a closer look at each of them! ♪

• Blade Form

You can see the weapon has the same amazing presence that it had in the games…! Even in chibi-size it still has a heavy look about it that makes it such an original weapon! (`・ω・´)ゞ

Looking from above you get an better feel for the size! ☆

You can also see that the detail isn’t only focused on the front – it’s just as detailed and amazing no matter what angle you look from! Plus it comes with effect parts perfect for combat scenes! ヽ(*・ω・)人(・ω・*)ノ

Here she is posed with the effect parts as well as her ‘combat’ expression… ready to combat Aragami big and small!

She even comes with an Orgetail Aragami to fight against! (o・ω・o)

I think I’d rather keep one as a pet instead of fighting it…!

In order to match with the Nendoroid design the Ogretail’s face has a bit of a comical feel about it! I’m told that the production team really struggled to get a good balance between ‘cute’ and ‘scary’, but I think he came out looking great!

But let’s get back to the adorable Alisa! She looks ready for anything! ♡

• Gun Form

The second form is also sculpted down to the finest of details! The shiny, mecha-like appearance also looks amazing! (・∀・)

Once again effect parts are also included to pose her using the weapon! ♡

Why is it that makes girls with guns so charming?! She looks fantastic! (/ω\)

I said the Blade Form had an amazing presence, but the Gun Form certainly isn’t any less noticeable! However… the biggest is still to come! (`・ω・´)

• Predator Form

It’s huge!! It’s so huge that it’s hard to see as a Nendoroid weapon! (゚A゚;)
Placing just the weapon on my hand for comparison!

It’s about the same size as my hand…!

It’s even big enough to eat wooser!!

Once again you can pose her with the weapon and Ogretail to create a fighting scene from the game! ♡

It’s hard to believe that all three of these amazing weapons are included! What an amazing set!! (°Д°;≡°Д°;)

The team must have put so much time and resources into this one Nendoroid…!

(・∀・) “But the weapons aren’t the only thing we focused on!”

We’re joined by the head planner, Otanaka-shi!

(・∀・) “We definitely did put a lot of work into the God Arc weapons… but these is another feature we made sure came out perfectly… a feature that Alisa is fairly famous for!”

Ah! I know! Her flat chest!!

(・∀・) “You hardly even notice it when she has the huge weapons out… but when you take a closer look…”

Alisa is definitely rather popular for the the little peek of chest from the opening in her shirt… even if there isn’t much to see! The way her skirt is curling upward slightly brings out Alisa’s sexy side a little more! (/ω・\) *peek*

(・∀・) “We know Alisa is well known as a confident God Eater… but she also comes with this expression to capture her other side!”

Awww!!! She’s adorable!! (*´▽`*)

(・∀・) “A blushing expression made to look like she’s trying to hide her embarrassment! It really gives a completely different feeling when compared to the other two expressions!”

I don’t know how much more I can take!(*´Д`)=з

You can even display her like this – with her embarrassed expression and hand out, as if inviting you to come with her! ♥

(・∀・) “You really get such a large set of options to display her with – pick whichever side of Alisa you enjoyed the most!”

Packed with weapons, an Aragami and a delicious flat chest…! ♡

Nendoroid Alisa Illinichina Amiella!

She’ll be up for preorder from tomorrow, the 20th February!
Be sure to check the GSC site for more details tomorrow! (。・ω・)ノ゙

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


  ∧_∧
 ( o・ω・).。0   (I foresee some interesting hobby talk this weekend!)
 (  つつ
 と_)_)

Anyway, I hope to see you all again tomorrow!

Frau Koujiro

Hello everyone, Kahotan here! (@gsc_kahotan)

When it comes to Pocky, I like the super thin kind! They make much more sense because you can choose to much on a whole bunch together if you want a thicker version, but if you just want to nibble slowly on them then they last way longer! I suddenly have a strange urge to eat some Pocky…!

Anyway, today I’m going to be taking a closer look at the 1/8th scale…

Frau Koujiro!! ♡

From the popular scientific adventure game and anime series ‘Robotics;Notes’ comes a 1/8th scale figure of Frau Koujiro, the genius programmer who loves to speak in internet slang. The figure is based on the cover of the 1st volume of the ‘ROBOTICS;NOTES REVIVAL LEGACY’ manga.

She is posed gazing ahead while holding onto a figure of her beloved Gunvarrel, with her characteristic hairstyle and uniform both sculpted in careful detail. She is seated on her favorite sofa while surrounded by Pocki packages, which all come together to create a figure that brings out her character perfectly!

She’s here!! (*´▽`*)♥

I’m sure many of you had been waiting for her ever since her prototype announcement during last year’s WonFes… and then again when the painted version was shown at this year’s WonFes!

She is based on the cover illustration of the 1st volume of the ‘ROBOTICS;NOTES Revival Legacy’ manga! ♡

The creases on her outfit and the flow of her hair are really beautiful, and bring out the Tatsuya Shihira’s illustrative style perfectly! Another area I have to point out immediately are those lovely juicy thighs!! <●><●>

Oooh!! (*´Д`)

So close and yet so far! But even without being able to see inside the pose is still amazingly sexy! By the way, the Gunvarrel she’s holding was actually made by using 3D data from another in-progress product, the ‘Full Action Gunvarrel’ (provisional name). The combination of the soft skin and mechanical robot also make for lovely contrast!

The skin you can see from in-between the gaps of her uniform… simply lovely! ♥
The sinking appearance of her legs into the stool is also amazing!


(I just realized I’ve only been taking pictures of her legs… Σ(OωO )!)

But that reminds me!
The original cover only actually showed up to her thighs!!

Where did the idea to pose her with sagging socks and candy boxes come from?

(・∀・) “Allow me to answer that!”

We’re joined by the figure’s head planner, Chanshuu-senpai!

(・∀・) “The candy boxes littering the floor are Frau’s favorite snack, ‘Pocki’!”

(・∀・) “We wanted to add something more to bring out Frau’s character, and this seemed like a great way to do so!”

By the way, each of the Pocki boxes are separate from the figure and can be placed wherever you like, or not used at all!

I’m fairly sure Frau would have them scattered around like above, but it’s compeltely up to you how you want to display them. A total of 10 boxes are planned to be included with the figure! ♪

(・∀・) “As you’ve already mentioned, we really paid special attention to small details – the edges of the skirt and sailor uniform are particularly detailed! Be sure to take a nice close look!”

And what about the loose socks? What inspired them?

(・∀・) “That was just one of my personal fetishes!”


…… Σ(OωO)

(・∀・) “Just kidding, that’s only half true. As I said before we wanted to bring out Frau’s character, and figured that while she was sitting playing with Gunvarrel she needed a more innocent look to her… which is where we decided on the loose socks!”

Let me take some photos by the window for a quick change of scenery!

I must admit that the scattered candy boxes, socks and Frau’s lovely expression really do show off her personality perfectly! (`・ω・´)ゞ

(・∀・) “I’m fairly confident that anyone who loves those loose socks even half as much as I do will really adore this figure!”

(・∀・) “I also want to say a very big thanks to the sculptor that created the figure exactly as I desired planned – Ajiken-san! Thank you very much! It’s a figure filled with love that I know fans of Frau and the series will love!”

Bring Frau home with you to enjoy all for yourself! The 1/8th Scale…

Frau Koujiro!!

She is up for preorder as of today! Orders from the GSC online shop will be running until the 19th March at 21:00JST, so don’t miss out!

Product Page: http://www.goodsmile.info/en/product/4227/
Online Shop: http://goodsmile-global.ecq.sc/gscscawd00022.html

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


  ∧_∧
 ( o・ω・).。0   (I’mma go go buy some Pocky!)
 (  つ─━━
 と_)_)

Anyway, I hope to see you all again tomorrow!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

Nendoroid Saki Miyanaga

Hello everyone, Kahotan here! (@gsc_kahotan)

I tried building an igloo with all the snow over the weekend, but eventually gave up. Firstly because they were sold out of snow shovels at my local hardware store, and secondly because I was all alone in the endeavour… 🙁

The snow may have come to an end, but the floor is still slippery with snow and ice, so everyone take care!! Anyway, today I’m going to be taking a look at a Nendoroid with a smile that will blow away the cold any day!

Nendoroid Saki Miyanaga! ♡

 

From the anime filled with cute girls and mahjong, ‘Saki: Zengokuhen’ comes a Nendoroid of Saki Miyanaga! She comes with three expressions including a smiling face, a focused face and a lost expression about to burst into tears! She also comes with a number of optional parts from the series including a mahjong table, replacement tile effect parts and a lightning effect part!

Additionally she also comes with both her long skirt for the national tournaments as well as her mini-skirt used in the prefectural matches! Be sure to display her with the previously released Nendoroid Nodoka Haramura for even more fun!

I’ve been waiting for her for ages!! ♪♪

The cute Mahjong player is heading to the Nationals to prove her skills… but she’s also headed to the land of the Nendoroids to prove her cuteness!! Saki Miyanaga! ♪

Officially this Nendoroid comes from ‘Saki: Zengokuhen’, but don’t forget that Nendoroid Nodoka Haramura was previously released from ‘Saki Achiga-hen episode of Side-A’ – so she is actually the second in the series of Nendoroids!
ヽ(*・ω・)人(・ω・*)ノ

Finally the main character of the series has joined the Nendoroids!

Holding onto her Mahjong tile and ready for action! ☆

Obviously she doesn’t just come with a tile though… in fact she comes with a rather impressive optional part!

A mahjong table! ♡

Originally the plan was to make it a lot smaller than this… but GSC’s resident mahjong lover decided that “If we’re going to make it then we may as well make it big!”. So we ended up making a chair as well, as well as adding some rather impressive details on the board too!

Plus she even comes with some effect parts for double the fun!

These parts allow you to pose Saki playing her best moves!! (。・ω・)ノ゙

Anyway, let’s move on by taking a look at her expression parts! Along with the lovely smile above she also comes with this expression even seen in the first episode of the new season! ♡

That innocent expression ready to burst into tears makes me want to protect her!! I’ll keep her company no matter where she goes to ensure she never gets lost again… I’ll even accompany her to the toilet!!

By the way, this expression can also be used in various other ways!

wooser: “Would you like to play some…. strip mahjong?”
Saki:”…!!”

I’m sure there are many other situations you could think of to use it with too!

Additionally, she also comes with an awakened expression, showing her focused and ready to beat anyone in her next match! (゚A゚;)

(・∀・) “Her awakening can be made even more epic by the addition of these effect parts!”

We’re joined today by the planner for Nendoroid Saki… Kyojin!

(・∀・) “These lightning effect parts connect to her front hair parts and stay in place very securely!!”

This expression plus the effect parts suddenly give Saki-chan a very intimidating air! She looks ready to take over the mahjong world!!

(・∀・) “There is one other extra she comes with… you may have noticed that her skirt here is rather long…”

… I think I know where this is going! Σ(・ω・ノ)ノ

(・∀・) “She also comes with a mini-shirt to switch between!”

…!?

Is she not… wearing any…?

(・∀・) “I’m not at liberty to say anything about that! You’ll have to wait and see what is underneath when you pick her up for yourself!”

Now that I think about it, I guess Nodoka’s was about the same length…

(・∀・) “Speaking of Nodoka-chan… Saki comes with special parts to pose the two together!”

Ah… this is the famous scene from the series!! (´;ω;`)

(・∀・) “Seen they were both released as Nendoroids now, we had to make a special arm part to allow them to be posed making a pinky promise!”

This means I just have to display them together with each other!

A Nendoroid allowing for all sorts of scenes from the show, great compatibility with Nodoka and loads of lovely optional parts…

Nendoroid Saki Miyanaga!

She’ll be up for preorder from the 18th February! ♡

Plus Nendoroid Nodoka Haramura will also be rereleased to go together with Saki! You can find the details about this over on the GSC home page tomorrow!!

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

Finally a quick notice!

Due to popular demand we have extended the order period for the WonFes exclusive products!

Orders will be taken for an extra three days, up until the 20th February 2014 at 21:00JST! More details can be found here!

Orders: GOODSMILE ONLINE SHOP WONDERFUL HOBBY LIFE FOR YOU!!

If you received an error message during your order, please contact the Online Shop at the address below!

■ GOODSMILE ONLINE SHOP WHL4U!! Customer Support
Contact Form: http://goodsmile-global.ecq.sc/contacts
Email: shop.overseas@goodsmile.jp

We’d like to offer our most sincere apologies for anyone who experienced these errors, and any inconvenience it may have caused you.

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


  ∧_∧
 ( ;・ω・).。0   (Is that a snow mark on the weather forecast… again?!)
 (  ∪∪
 と_)_)

Anyway, I hope to see you all again tomorrow!

Planning Team / Kahotan
Twitter ID: gsc_kahotan