Hello everyone, Kahotan here! (@gsc_kahotan)

Over the last weekend I was visiting Machi Asobi! It was my second time attending, and once again it has left me with a number of great memories! I hope I can join in the fun against next year in May! ( -ノェ-)

wooser is ahead of me a little, as this was his 3rd time attending Machi Asobi! He could be seen all over the place from the busting shopping streets all the way to Mt. Bizan!

wooser was super excited throughout the event… jumping up and down in excitement from all the girl’s who came to see him!! ♪

But anyway, today we will be continuing our tour of the offices that started last week! You can find part one of the series over here: Exploring the GSC Offices with wooser! (Part 1)!

Also don’t forget that the wooser anime series has been renewed for a second season, and the second volume of the manga will be going on sale on the 7th November! But for now you’ll have to just enjoy his tour through the offices as staff members cling to his soft furry ears!

He has been captured by Hamako half-way down the hallway!

It seems that he did quite enjoy looking at the posters up on the wall – he stood there for a good two minutes looking at them!

The poster wooser is staring so intently at here is Uzuki Shimamura: New Generation Ver.! She is up for preorder until the 23rd October 2013, so don’t miss out!

Moving on, wooser decided to visit the the desk of his original creator… Yoshiki Usa!


He’s not here! (He must have sensed the danger coming…)

In his place are Nyanperona and Frog-san!

wooser and Nyanperona finally together again! (゚A゚;)

As Usa wasn’t here himself, wooser decided to try out the chair! ★

Fuu… (to be read in wooser’s voice)
If you look close you can see just how many wooser goods surround his desk!! Taking a photo from the front causes some wooser plushies to invade the corner! ☆

wooser now seems rather happy that he was able to experience being in the shoes of his creator, and decides to move onto the GSC president’s room!

Even though he can see a smaller version of himself in the room, he couldn’t get through the door no matter how hard he tried!

To make matters worse, the head of GSC caught him in the act and posted it on Twitter!!

Anyway, if the president’s room isn’t possible we’ll just have to move onto the production studios instead!

New and unannounced figures await behind this door!

Let’s head inside…



He’s stuck in the door once again!!

But he would be able to fit if deflated a little!!

(This is the sound a wooser makes when you suck the air out from him)

His ears are still too big to fit through the door!!

It seems wooser isn’t going to get his opportunity to see all the new figures today…(´・ω・`)

However! I shall go in and get some of the latest info in his place!!

I must practice my ninja skills and enter silently so no one notices me…

There is some kind of giant ventilation thingy on the ceiling… but all in all it seems really quiet in here… The first thing I found was this mechanical thingy!!

This is an airbrush used to apply surfacer! The reason that all prototypes have a grey color is because they are coated in the surfacer that comes out of this airbrush! (`・ω・´)

Hmm, it looks like Takanon-shi is busy working on something in the distance!

I watched silently for when he left so I could sneak up and see what he was working on… but what is it…?

It’s the wall from the Nendoroid Colossus Titan & Attack Playset!

But why is the middle section transparent?!
I don’t remember this being a glass wall!! ヽ(д`ヽ彡ノ´д)ノ

This is actually transparent as the sculpting is currently being adjusted. It’s something like a very early sample for the production team to work on!

There are all sorts of tools scattered all about the production studio…

But what’s that familiar looking small tool beside the craftknife…?

More importantly! The box at the top reads “Eren”!

It’s Nendoroid Eren’s colored prototype!!

With a discovery like this I can’t resist…

It’s time for a sneak peek at Nendoroid Eren Yeager! ∠(゚Д゚)/

Ooooh!! He looks great!!!

Of course the little tool in the photo above was one of the blades connected to his vertical maneuvering equipment! I decided a closer look was required so I borrowed him for photos at my own desk! (ΦωΦ)フフ

The shouting expression also looks great!

It makes me wish I could be fighting the Titans by his side!!

The details are still a secret for the moment… but the included parts allow you to recreate a very memorable scene! A scene which I love so very much!!

But that’s not all… up for preorder from tomorrow is:

figma Eren Yeager!!

You really can’t help but want to collect all the Attack on Titan figmas!
Just look at this product image….!

(*´Д`)b Great Job! ♥

It makes me wonder how many more characters we can expect in the Attack on Titan series… personally I’d love to see Hange-san! (・∀・)

Just imagine having the excited expression she has whenever she talks about researching the Titans!!

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

Finally a little notice! As I announced at the start of the blog…

The second volume of ‘wooser’s hand-to-mouth life’ will be on sale from the 7th November from Seikaisha!

‘wooser’s hand-to-mouth life’: Volume 2
Author: Yoshiki Usa / Illustrator: Tomoko Fujinoki
Price: ¥1,050
Release Date: 11/07 (Thurs)

To celebrate the release there is going to be a…
wooser & Nyanperona Shikishi & Photo Event!

Date: 9th November (Sun) from 13:00~
Place: animate Shibuya
More details can be found here: http://www.animate.co.jp/event/event_e20131109un/ (Japanese)

Karneval’s 12th volume will be released on the 25th October, so the wooperona combination once again makes perfect sense! ☆

We can expect a lot of yellow at the event…!

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\

 (`・ω・)   .。0(Tomorrow I’m going to the KanColle Cafe! I won’t lose to the typhoon!)
 ( ∪ ∪

I hope to see you all again next week!

Planning Team / Kahotan
Twitter ID: gsc_kahotan