Hello everyone, Kahotan here! (@gsc_kahotan)
Today I’m going to be taking a look at a figure scheduled to ship out from GSC on the 11th September…
Lucy! ♪
She’s the beautiful celestial mage from the popular anime and manga series, FAIRY TAIL! The pose comes directly from the cover illustration of the 9th volume of the manga!
The key in her right hand has been faithfully sculpted, and can be attached and removed whenever you wish!
But that also means you need to be careful not to lose it! ><
I’ve dropped it under my desk at least three times already…
And just look at her from above! She has such a perfect body!!
What a sight!! (*´Д`)
Even from the side her chest is impressive but from this angle… (；・∀・)
Phew! Now you can’t see too much! Thanks wooser! For future reference, a wooser stuck onto a thin brass wire makes for a very useful panties blocker! ☆
(・∀・ ) “Ah! It’s Lu-chan!”
Ah! We have a guest! Today we’re joined by Yuri-chan Honpo from the planning team! Let’s see what she has to say about this figure!
(・∀・) “One of my personal favorite points is her belly button!! Plus the stomach area around and above it!”
Her bags can all be removed, for a completely unobstructed look! ☆
(・∀・) “Also… I don’t even think I need to mention it… but her chest area is super sexy! ♡”
Ooh? Even from this angle you can even see some other fabric sticking out from under her clothes! （゜∀゜）!!
(・∀・) *Cunning Smile* “Plus if you move down to her legs… “
Ooh! That line between her socks and skin!!
(・∀・) “We also put a lot of effort in getting the boots to look realistic!”
I can see that! The paintwork on the shoes and bags looks magnificent!
(・∀・) “Just as this went into production, the original author of the series Hiro Mashima personally took a look at it too!”
So even the original author approves of this rather sexy Lucy…! (ﾟＡﾟ;)
The heroine of FAIRY TAIL, also known as the ‘second main character’…
The 1/7th Scale Lucy!
She’s shipping out to stores on the 11th September!
Oh, and as a little side note… her skirt is a separate part! ^^
ﾟ･*:.｡..｡.:*･ﾟﾟ･*:.｡..｡.:*･ﾟ ﾟ･*:.｡..｡.:*･ﾟﾟ･*:.｡..｡.:*･ﾟ ﾟ･*:.｡..｡.:*･ﾟﾟ･*:.｡..｡.:*･ﾟ
Finally a quick notice!
Yesterday was the 6th Fuji Speedway Race, where
GSR & Studie with TeamUKYO…
TOOK FIRST PLACE!!
A big thank you to all the team’s supporters!!
To celebrate the victory, the figma personal sponsor course will now include this trophy!! (｀・ω・´)
Ah, but it won’t quite be this size!
It’ll be shrunk down to figma size to display with your figma Racing Miku!
More details can be found here: (Japanese)
Good Smile Racing Official Website
Good Smile Racing Blog (9th September)
The deadline for the figma sponsor course is the 11th September, so don’t miss out!
ﾟ･*:.｡..｡.:*･ﾟﾟ･*:.｡..｡.:*･ﾟ ﾟ･*:.｡..｡.:*･ﾟﾟ･*:.｡..｡.:*･ﾟ ﾟ･*:.｡..｡.:*･ﾟﾟ･*:.｡..｡.:*･ﾟ
／Kahotan’s Inner Voice＼
（ ・ω・) .。0○(The cute Gatling girl is coming soon…!)
（ ∪ ∪
と＿_）__）
Anyway, I hope to see you all again tomorrow!!
Planning Team / Kahotan
Twitter ID: gsc_kahotan