Shigure Kai Ni (Part 2)

 

\”Shigure, heading out!”/

 

Hello everyone, Kahotan here! (@gsc_kahotan)

Today I’m going to be taking another look at this item which went up for preorder last Tuesday!

Shigure Kai Ni!

From the popular browser game ‘Kantai Collection -KanColle-‘ comes a 1/8th scale figure of the 2nd Shiratsuyu Class Destroyer, Shigure Kai Ni! The pose is based on the illustration used on Shigure’s card in Bushiroad’s card game, ‘Weiβ Schwarz’. The ship parts differ to those normally seen in the games illustrations, and the pose depicts Shigure in a confident and powerful looking way that fans are sure to enjoy!

Additionally, the figure comes with alternate parts that allow you to display her more true to the games illustration – with the larger ship parts attached to her back and smaller turrets on her arms – quite a large variation for a scale figure. The smaller turrets on the sides as well as the torpedo launchers on her legs are also articulated, allowing you to place them at the angle that you think suits her best!

Kujou Ichiso’s illustration has been faithfully transformed into a figure!

The latest KanColle figure from GSC! You can find my previous article on the figure over here:
http://mikatan.goodsmile.info/en/2015/02/26/shigure-kai-ni-part-1/

The figure is now up for preorder… and you may or may not have noticed, but something is quiet different compared to the previous time I showed her on my blog! ヽ(・ω・´(`・ω・´)ノ`・ω・)ノ

Shigure Kai Ni can in fact be posed in two distinct poses! The first is the exact same as the original illustration – with the two large cannons held in her hands… but you can also instead move the cannons onto her back to recreate the original game’s appearance as well!!  

Today I’ll be taking a look at just how you switch between these two versions!! ヽ(゚◇゚ )ノ 

Let’s swap over to the other version step-by-step! 

1. Remove Ship Parts

First off, you need to take the large cannon ship parts…

…and detach them like so!

The parts are quite easily detached and reattached! You also can then remove the parts that connect to her hips, which you can see below!

 

2. Combine the two Halves!

I decided to make a GIF to illustrate this! (`・ω・´)ゞ

 

I wanted to make the combination look awesome! So I added a whole bunch of unnecessary frames and movements, but the two halves basically connect into each other very quick and easily!

3. Twist the Double-Barrelled Gun Part Upward and Detach the Single Barrelled Gun!

Twist!

Detach!!

The multi and single-barrelled turrets connect onto the larger parts with a round connector, which means they not only detach, but can also be attached at various different angles like this!! ε=(。・д・。)


△ The torpedo launchers on her legs are also articulated!

4. Turret and Alternate Hand Parts

The single-barrelled turret can then connect onto the alternate hand parts!

△ The barrel can also be moved around for different nuances!

Her right hand also comes with an alternate clenched hand part, which really completes the confident pose! (●´ω`●)ゞ

This angle really shows off the fluttering skirt and allows a nice peek at her thighs!

Let’s take a look a little lower at her lovely long legs as well! <○><○>

Her slender build means that her thighs and calves are very nice and shapely!

The WonHobby Selection figure Musashi Kai: Heavy Armament Ver. had much more meaty upper legs, which I thought were lovely… but Shigure’s healthy looking legs are a lovely contrast!

Along with the lovely thighs, you also get a nice look at her charming knees!!

Anyway! I got a little carried away for awhile, but…
…the posing is now complete!! 
ε=(。・д・。)

Even though the only part that has actually been switched out completely is the hand parts… the moving around of parts really allows for a very different appearance! (‘-‘*)(,_,*)(‘-‘*)(,_,*)

It’s a rather simple design, but it works so very well! Even someone as clumsy as myself was able to switch between the poses with ease, so I’m sure everyone will have no trouble at all! ♪

* Please note the product is still in development. Certain aspects may still change.

 

One figure, two great poses!

The calm and cool Kanmusu! ♡

Shigure Kai Ni!

She is currently up for preorder!

Product Page: http://www.goodsmile.info/en/product/4863/

Preorders from the GOOD SMILE ONLINE SHOP will also receive a B2 poster as a bonus! The design hasn’t been completed just yet, but it will be announced shortly! Preorders from the GSC Online shop are open until the 15th April at 21:00JST, so make sure you don’t miss out! ヽ(*・ω・)人(・ω・*)ノ

Online Shop: http://goodsmile-global.ecq.sc/gscscawd00050.html/

・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚

Finally a live broadcast notice! (σ・∀・)σ

Next week Tuesday, the 17th March, will be Kahotan Station: March Edition!

======================

Kahotan Station: March Edition 

Date / Time: 17th  March from 20:00JST~
URL: http://live.nicovideo.jp/gate/lv213437191

Contents:

◇ This Month’s Highlights!

・ All the μ’s members as Nendoroids soon! ♪
・ The German IS representative?!
・ Otonokizaka High School member as figmas…?
・”Midas”. A step above Mk.20!

◇ A Look at other upcoming goodies! 

・The latest in the figFIX series! A Commanding Officer! ♡
・Ryuko as fans may remember her in the last episode!
・Toyogasaki Academy’s 3rd year student and light novelist!

…and more

◇ Plus a look at AnimeJapan 2015 sales goods!

======================

This time around my guest MC will be Kyojin from the planning team! We hope you’ll join us! ♡

See you there!! (。・ω・)ノ゙ 

゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚ ゚・*:.。..。.:*・゚゚・*:.。..。.:*・゚

/Kahotan’s Inner Voice\


∧_∧
( ・∀・) .。0 (Even in this cold the socks don’t cover her knees…)
oノ∧つ⊂)
( ( ・∀・).。0 (…high school girls are amazing like that!)
∪( ∪ ∪
と__)__)

See you all again next week!!

Planning Team / Kahotan
Twitter ID: gsc_kahotan

 

©2015 DMM.com/KADOKAWA GAMES All Rights Reserved.